The A30.7 is a seven-channel (7 x 150 watt) power amplifier utilising proprietary UFPD technology (please see technologies). It is designed to provide high power output with very low distortion for Primare’s SP33 audiophile preamp/processor and all other multi-channel audio processors. UFPD’s instantaneous rise time and prodigious power result in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A30.7 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
Ampli tích hợp I15 Prisma là mẫu ampli tiếp nối truyền thống lâu đời của hãng âm thanh Thụy Điển. Đây là một thiết kế mới, đặc biệt nhỏ gọn, thanh lịch đồng thời tích hợp những công nghệ tiên tiến.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 DAC được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 PRISMA được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Ampli tích hợp I35 là phiên bản thuần analog được trang bị mạch công suất UFPD 2 với đầy đủ các kết nối balanced / analog dành cho những người yêu thích chất âm của mẫu ampli cao cấp I35 PRISMA nhưng không muốn sử dụng quá nhiều công nghệ.
Ampli tích hợp I35 DAC là phiên bản thuần analog được trang bị mạch công suất UFPD 2 với đầy đủ các kết nối balanced / analog được tích hợp thêm bo mạch giải mã dành cho những người yêu thích chất âm của mẫu ampli cao cấp I35 PRISMA nhưng không muốn sử dụng quá nhiều công nghệ.
Ampli tích hợp I35 Prisma là mẫu ampli mới nhất được trang bị rất nhiều kết nối và công nghệ hiện đại cùng chất âm cuốn hút của vùng Bắc Âu dành cho ngôi nhà mới của bạn.
If you cherish your vinyl and want to hear the most from it, the R32 MM-MC amplifier provides the ideal interface between the low-level output of a cartridge and the line-level inputs of your hi-fi system. Having a standard component width rather than the ‘midi’ size of its R20 predecessor, the R32 is easier to install and matches other Primare components for a uniform system look. Its larger chassis also benefits circuit layout, allowing newly upgraded and highly sensitive signal components to be better isolated from an improved power supply, resulting in cleaner sound and greater fidelity.
The A60 is a reference audiophile, fully balanced 2 x 250W UFPD stereo power amplifier designed to complement all high-end pre-amplifiers but chiefly as a companion to its matching PRE60 pre-amplifier. With the 60 series components, Primare reclaims its presence in the high-end music system market, reprising the iconic designs of previous decades with ravishing new separates, complete with state-of-the-art audio streaming performance and striking two-tone bodywork. By combining our traditional build quality and analogue circuit design with the finest digital processing, the first 60 series music system represents a major step-up from the 30 series and introduces a new supremely audiophile level of performance to our product range.
The A60 is designed to provide high power output with very low distortion for our PRE60, as well as multi-channel audio processors. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A60 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
With the mighty A32, Primare has set foot on truly esoteric ground. This is a massive fully balanced design capable of controlling the most demanding low-sensitivity speakers – even at the very highest volume levels. The specification is impressive. Equipped with a 2kVa toroidal transformer featuring four separate windings, two for each (L/R) channel; a reservoir of 90.000 uF and sixteen bipolar output devices per channel, the A32 is undeniably an elite amplifier in the classic Primare dual/mono mould. Both balanced and unbalanced inputs are provided, as well as twin speaker terminals for bi-wiring, a trigger input and RS232C inputs. If the unbalanced inputs are used the A32 converts the signal to balanced, to take full advantage of its balanced design.
The A34.2 is a 2 x 150 watt stereo power amplifier utilising proprietary UFPD technology. It is designed to provide high power output with very low distortion for Primare’s PRE32 audiophile preamplifier and all other preamps, as well as multi-channel audio processors. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A34.2 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
The I32 is an upgradable two x 120 watt integrated amplifier utilising proprietary UFPD power technology. It is designed to provide high power output with very low distortion and system control for Primare’s 30 series range of hi-fi separates. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the I32 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat. In addition it provides a special eco-friendly standby mode of just 0.2 W.
The I22 is a two x 80 watt integrated amplifier utilising our acclaimed proprietary UFPD power technology. It is designed to provide high power output with very low distortion and system control.
An optional DAC board is available for the I22, comprising three digital inputs for the upgrading of existing CD players via their digital outputs, and the streaming of music files from PCs and Macs. There is an isochronous USB-B input (16-24bit data at 44.1 to 96kHz), a TOSLINK connector (16-24 bit data at 44.1-192kHz) and SPDIF (16-24bit/44.1-192kHz). Specialised processing at the Isochronous USB-B input re-clocks the incoming data for reduced jitter and greater bit resolution through the DAC, optimising sound quality from music files.
The PRE60 is a reference audiophile pre-amplifier designed to complement all high-end power amplifiers but chiefly as a companion to its matching A60 UFPD power amp. With these new components Primare reclaims its presence in the high-end music system market, reprising the iconic designs of previous decades with ravishing new separates, complete with state-of-the-art audio streaming performance and striking two-tone bodywork. By combining our traditional build quality and analogue circuit design with the finest digital processing, the first 60 series music system represents a major step-up from the 30 series and introduces a new supremely audiophile level of performance to Primare’s product range.
The PRE60 features the comprehensive OLED display and control parameters established by the EISA award-winning I32 integrated amplifier. It is housed in a heavy gauge alloy steel chassis (15mm front panel), and incorporates two pairs (L/R) of low-noise balanced XLR inputs and 4 pairs of RCA inputs. In addition there are two pairs of RCA outputs and 2 pairs balanced XLR outputs, as well as a record output, RS232, trigger and IR inputs. The integrated DAC/media board offers PRE60 functionality and streaming options can be fully controlled using the Primare App for iOS and Android, including input selection, volume control, file browsing and selection from online and stored music libraries. A high quality aptX Bluetooth upgrade is also available for the PRE60.
The PRE32 is an upgradable audiophile pre-amplifier designed to match the Primare A34.2 and all Primare power amplifiers. It features the comprehensive OLED display and control parameters established by the EISA award-winning I32 integrated amplifier. The PRE32 is housed in a heavy gauge alloy steel chassis, and incorporates two pairs (L/R) of low-noise balanced XLR inputs and 4 pairs of RCA inputs. In addition there are two pairs of RCA outputs and a single pair of balanced XLR outputs, as well as a record output, RS232, trigger, IR and RF inputs. MEDIA/streaming connections such as USB, iPod, LAN etc are available through the modular MM30 media board, which may be enhanced with a high quality aptX Bluetooth upgrade.
