The A30.7 is a seven-channel (7 x 150 watt) power amplifier utilising proprietary UFPD technology (please see technologies). It is designed to provide high power output with very low distortion for Primare’s SP33 audiophile preamp/processor and all other multi-channel audio processors. UFPD’s instantaneous rise time and prodigious power result in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A30.7 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
Audio Analogue Crescendo AMP by AIRTECH has on output power of 50W on a 8Ohm impedance and 80W on a 4Ohm impedance with a THD+N of less then 0.05%. The SNR is more than 100dB and the band-width more than 150KHz. Crescendo AMP by AIRTECH is a High End product in all its parts. The cooperation with AIRTECH has helped to make a unique a products that was already very good: the changes and technologies used in some key points of the circuit are mainly related to the wiring, cables used are 7N OCC in pure copper, the same used for the production of AIRTECH cables, adding Wima capacitors for better filtering and decoupling of the states. These changes effectively allow a significant improvement of sound performance on all parameters and mainly in micro detail and the three-dimensionality of the sound stage. The sound is more open, listening is more pleasant, never tiring thanks to better “musicality”.
The V-100 with its huge toroid transformer offers access to the world of Audiophile Sounds at a price performance ratio unmatched in this class of equipment.
Its perfect internal assembly, 5 line terminals for audio sources and record player jack with a MM-System offer the listener a wide range of audio sources from which to choose from.
Ampli tích hợp AudioBlock V-220 sử dụng biến áp nguồn xuyến (toroid transformer) với công suất 40 watt / kênh đảm bảo khả năng mang đến âm thanh chi tiết với độ động tốt cho những không gian có kích thước nhỏ như phòng ngủ!
Ampli EA101EQ-G nhỏ gọn, đáp ứng đầy đủ những gì người dùng thật sự cần. Đó vừa là ampli tích hợp, vừa là DAC, vừa là thiết bị cân chỉnh âm học phòng nghe, vừa điều khiển được cả subwoofer, vừa là ampli headphone, vừa có thể phát nhạc thông qua bluetooth. Tất cả chỉ với mức giá chỉ 1.000USD và lại mang thương hiệu Đức vô cùng nổi tiếng: ELAC.
Ampli tích hợp I15 Prisma là mẫu ampli tiếp nối truyền thống lâu đời của hãng âm thanh Thụy Điển. Đây là một thiết kế mới, đặc biệt nhỏ gọn, thanh lịch đồng thời tích hợp những công nghệ tiên tiến.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 DAC được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Liên tục cải tiến và hoàn thiện sản phẩm; mẫu ampli tích hợp I25 PRISMA được Primare trang bị mạch công suất UFPD thế hệ thứ 2, dựa trên nguyên mẫu UFPD vốn đã giành được rất nhiều giải thưởng của hãng âm thanh Thụy Điển.
Ampli tích hợp I35 là phiên bản thuần analog được trang bị mạch công suất UFPD 2 với đầy đủ các kết nối balanced / analog dành cho những người yêu thích chất âm của mẫu ampli cao cấp I35 PRISMA nhưng không muốn sử dụng quá nhiều công nghệ.
Ampli tích hợp I35 DAC là phiên bản thuần analog được trang bị mạch công suất UFPD 2 với đầy đủ các kết nối balanced / analog được tích hợp thêm bo mạch giải mã dành cho những người yêu thích chất âm của mẫu ampli cao cấp I35 PRISMA nhưng không muốn sử dụng quá nhiều công nghệ.
Ampli tích hợp I35 Prisma là mẫu ampli mới nhất được trang bị rất nhiều kết nối và công nghệ hiện đại cùng chất âm cuốn hút của vùng Bắc Âu dành cho ngôi nhà mới của bạn.
P-307 is the control center of today’s high end sound systems. Its two main functions are source selection and volume control. Every effort has been made to keep P-307 as accurate as possible.
To avoid unwanted interactions with adjacent source components, P-307 uses high-quality relays and switching designs to ensure that every source is intact. Thus all sources remain separate from one another and from the power amplifier and cables.
In the digital age, analog preamplifiers remain the most reliable and neutral-sounding component of controlling volume. P-307 uses a superior attenuator that offers a neutral sonic performance.
Since AC power supply generates noise, P-307′s power supply is housed in a separate chassis. Thus P-307′s audio circuits are exposed only to quiet, regulated DC power and the audio signals itself.
The R-1.5 amplifier is designed to drive any loudspeaker, producing warm, “tube like” sound quality. It has been constructed with premium parts, including metal film resistors and film capacitors, reinforcing Usher’s reputation for high-quality manufacturing. High-power bipolar transistors, designed by Motorola, can handle sophisticated power and current requirements. And its massive AC power transformer works with a high-capacitive filtering system for the purest sound. Other features include Burrow-Brown OPA2134P Sond Plus Series op amps, bridging switch for mono block operation, terminals that accept both banana plugs and spades, optional balanced inputs and large handles on the front and rear panel.
If you cherish your vinyl and want to hear the most from it, the R32 MM-MC amplifier provides the ideal interface between the low-level output of a cartridge and the line-level inputs of your hi-fi system. Having a standard component width rather than the ‘midi’ size of its R20 predecessor, the R32 is easier to install and matches other Primare components for a uniform system look. Its larger chassis also benefits circuit layout, allowing newly upgraded and highly sensitive signal components to be better isolated from an improved power supply, resulting in cleaner sound and greater fidelity.
The A60 is a reference audiophile, fully balanced 2 x 250W UFPD stereo power amplifier designed to complement all high-end pre-amplifiers but chiefly as a companion to its matching PRE60 pre-amplifier. With the 60 series components, Primare reclaims its presence in the high-end music system market, reprising the iconic designs of previous decades with ravishing new separates, complete with state-of-the-art audio streaming performance and striking two-tone bodywork. By combining our traditional build quality and analogue circuit design with the finest digital processing, the first 60 series music system represents a major step-up from the 30 series and introduces a new supremely audiophile level of performance to our product range.
The A60 is designed to provide high power output with very low distortion for our PRE60, as well as multi-channel audio processors. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A60 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
With the mighty A32, Primare has set foot on truly esoteric ground. This is a massive fully balanced design capable of controlling the most demanding low-sensitivity speakers – even at the very highest volume levels. The specification is impressive. Equipped with a 2kVa toroidal transformer featuring four separate windings, two for each (L/R) channel; a reservoir of 90.000 uF and sixteen bipolar output devices per channel, the A32 is undeniably an elite amplifier in the classic Primare dual/mono mould. Both balanced and unbalanced inputs are provided, as well as twin speaker terminals for bi-wiring, a trigger input and RS232C inputs. If the unbalanced inputs are used the A32 converts the signal to balanced, to take full advantage of its balanced design.
The A34.2 is a 2 x 150 watt stereo power amplifier utilising proprietary UFPD technology. It is designed to provide high power output with very low distortion for Primare’s PRE32 audiophile preamplifier and all other preamps, as well as multi-channel audio processors. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A34.2 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
The I32 is an upgradable two x 120 watt integrated amplifier utilising proprietary UFPD power technology. It is designed to provide high power output with very low distortion and system control for Primare’s 30 series range of hi-fi separates. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the I32 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat. In addition it provides a special eco-friendly standby mode of just 0.2 W.
The I22 is a two x 80 watt integrated amplifier utilising our acclaimed proprietary UFPD power technology. It is designed to provide high power output with very low distortion and system control.
An optional DAC board is available for the I22, comprising three digital inputs for the upgrading of existing CD players via their digital outputs, and the streaming of music files from PCs and Macs. There is an isochronous USB-B input (16-24bit data at 44.1 to 96kHz), a TOSLINK connector (16-24 bit data at 44.1-192kHz) and SPDIF (16-24bit/44.1-192kHz). Specialised processing at the Isochronous USB-B input re-clocks the incoming data for reduced jitter and greater bit resolution through the DAC, optimising sound quality from music files.
